How to Inspect a Headstone After Delivery: A Complete Guide

Estimated read time: 9 minutes

How to Inspect a Headstone After Delivery: A Complete Guide
Written By: Steven Vaynberg
Reviewed For Accuracy By: Malhar Patil
Last Updated: October 2026

A headstone arriving with a misspelled name or a crack hidden along the edge is the kind of mistake that haunts families for years. And once that stone is set in the ground, fixing it becomes expensive, time-consuming, and emotionally draining.

The inspection window is short, often just 24-72 hours, so knowing exactly what to look for matters. This guide walks you through checking for shipping damage, verifying engraving accuracy, confirming specifications, and documenting everything properly before installation.

What to Do the Moment Your Headstone Arrives

Before the headstone gets installed at the cemetery, you'll want to verify the accuracy of all engravings, check for shipping damage, and confirm the material and dimensions match your original order. This inspection happens at the delivery point, whether that's your home, the cemetery, or a monument company's facility.

Here's the thing: once a headstone is set in the ground, returns and replacements become complicated and expensive. Taking 15-20 minutes to inspect everything now saves you weeks of delays later.

Step 1: Confirm the shipment matches your order

Grab your order confirmation and compare it to the shipping label before opening anything.

  • Order number: Does it match your receipt exactly?
  • Item description: Is the correct material, size, and style listed?
  • Quantity: Are you receiving everything, including the base if you ordered one?

Step 2: Inspect the crate and packaging first

Look at the exterior of the shipping crate carefully. Dents, punctures, water stains, or crushed corners often signal trouble inside. If the packaging looks rough, the headstone probably took some hits during transit too.

Step 3: Photograph everything before unpacking

Pull out your phone and document the delivery from every angle. Capture the shipping labels, any visible damage to the crate, and the overall condition before you open anything.

Timestamped photos become critical evidence if you end up filing a warranty claim or dispute with the shipping carrier. No photos means no proof.

Step 4: Unpack on a flat, padded surface

Granite and marble chip easily when set on concrete or gravel. Lay down moving blankets, thick cardboard, or even old towels before placing the headstone down.

If the stone is heavy, and many granite headstones weigh 200-400 pounds, get help. Two people minimum, and lift with your legs.

How to Check for Shipping Damage on a Headstone

Even small chips or hairline cracks can worsen over time when exposed to rain, snow, and freeze-thaw cycles. Catching damage now protects your investment for decades.

Chips and cracks along edges

Run your fingers along every edge and corner since those areas take the most abuse during shipping. A tiny cosmetic chip might be acceptable to you, but a crack that extends into the body of the stone could spread over time.

If you feel anything rough or see a visible line, flag it right away.

Surface scratches and polish flaws

Examine the polished face in natural daylight, tilting the stone at different angles. Scratches often hide until sunlight hits them just right.

The polished surface of a granite headstone typically has a mirror-like finish. Any dull spots or swirl marks indicate a problem.

Hairline fractures and stress marks

Here's a trick: wet the surface with plain water. Hairline fractures that are invisible when dry often become clearly visible when wet. These thin lines can expand during winter freeze-thaw cycles, eventually splitting the stone.

Damage to bronze plaques and inserts

If your headstone includes bronze elements, check for dents, bent corners, or finish inconsistencies. The patina, that slightly aged bronze color, varies naturally, but it shouldn't be splotchy or show obvious discoloration from mishandling.

How to Verify Engraving Accuracy and Quality

Engraving errors are among the most common headstone issues, and among the most heartbreaking to discover after installation. A misspelled name or wrong date typically means the entire stone gets remade, adding weeks to your timeline.

Names, dates, and spelling

Cross-reference every single character against your approved proof. Read it letter by letter, number by number.

  • First, middle, and last names: Spelled exactly as approved?
  • Birth and death dates: Correct format, correct numbers, no transposed digits?
  • Titles or honorifics: Dr., Sr., Jr., military rank all accurate?

Epitaph and verse wording

Read the entire inscription out loud. Reading aloud catches missing words, repeated words, and punctuation errors that your eyes might skip over when reading silently.

Check that line breaks and spacing match your proof exactly.

Artwork, symbols, and photo etchings

Verify that religious symbols, military emblems, or custom artwork match what you ordered. For laser-etched photos, look for clarity and correct positioning.

"Ghosting," which refers to a faded or unclear image, or blurry details indicate a quality problem worth flagging.

Engraving depth and sharpness

Run your finger through the engraved letters. They typically feel uniformly deep with crisp edges. Shallow or uneven engraving may weather poorly over time, becoming difficult to read within a few years.

How to Inspect Different Headstone Materials

Different materials have different vulnerabilities. Knowing what's normal versus concerning for your specific headstone type helps you inspect with confidence.

Granite headstones

Granite is the most durable cemetery material, but check for unexpected pitting, mineral inclusions like dark spots or streaks, and color consistency. Natural variation is normal. Large discolored patches or areas that don't match the sample you approved are not.

Bronze markers and plaques

Look for finish consistency across the entire surface. Check that mounting holes align properly and that raised lettering is intact with smooth edges.

Minor surface oxidation may be intentional, creating that classic bronze patina. Scratches or dents, on the other hand, are damage.

Marble and limestone memorials

Marble and limestone are softer stones that require more careful inspection. Natural veining can look like cracks, so compare to your proof photos. Check for chipping along edges and surface consistency throughout.

How to Confirm Size, Weight, and Specifications Match Your Order

Bring a tape measure. This takes two minutes and catches errors that could cause cemetery rejection.

Specification

Your Order

Delivered Item

Length

Width

Thickness

Material

Finish type

If you ordered a base and headstone together, verify they match in color and that the headstone fits the base properly.

How to Document Your Headstone Delivery for Warranty Claims

Proper documentation is your safety net. A few extra minutes now can save major headaches if something goes wrong.

Photos and video walkthroughs

Capture close-ups of any damage plus wide shots showing overall condition. A brief video where you narrate what you're seeing creates strong evidence.

Get shots of all four sides, the top, and the bottom if accessible.

Written inspection notes

Create a dated, written record of your findings. Include what you inspected, any concerns, the delivery driver's name, and the time of delivery. A notes app on your phone works perfectly.

Delivery receipts and bill of lading

The bill of lading is the shipping document listing contents and condition. If you notice damage, write it directly on this document before signing.

Keep copies of everything: receipts, bills of lading, and any communication with the seller.

What to Do If You Find a Defect or Engraving Error

Finding problems is stressful, but they're fixable. Here's how to handle it step by step.

Step 1: Pause installation immediately

Do not install a damaged or incorrect headstone. Installation makes returns and replacements significantly more complicated and may void your warranty entirely.

Step 2: Contact the seller within the reporting window

Most monument companies and online retailers require damage reports within 24-72 hours of delivery. Find this deadline in your order paperwork and act quickly. Waiting too long can void your claim.

Step 3: Submit photos and written documentation

Email your photos, video, and written notes to the seller. Include your order number and a clear description of the issue.

Keep records of all communication by screenshotting emails and saving confirmation numbers.

Step 4: Review replacement or refund options

Typical outcomes include full replacement, repair, partial refund, or store credit. Custom-engraved headstones may take additional weeks to remake, so factor this into your planning.

How to Verify Cemetery Compliance Before Installation

Cemeteries have specific rules about headstone size, material, style, and sometimes even color. Before scheduling installation, confirm your headstone meets the cemetery's requirements.

Contact the cemetery office with your headstone specifications. Some cemeteries only allow flat markers in certain sections, while others have height restrictions. Getting rejected at installation means delays and potential restocking fees.

When to Schedule Headstone Installation After Inspection

Once your inspection passes, coordinate with the cemetery and installation company. For new graves, ground settling typically takes several months. Installing too early can cause the headstone to shift or sink.

Some families wait for a meaningful date like a birthday or anniversary. There's no rush once you've confirmed everything is correct.

How to Safely Clean a Headstone Before Installation

If your headstone has dust or packaging residue, gentle cleaning is fine. Use mild dish soap mixed with water and a soft cloth or natural-bristle brush.

Avoid bleach, pressure washers, and harsh chemicals. These products can damage the finish and void warranties. Rinse thoroughly to prevent soap residue buildup.

Frequently Asked Questions About Headstone Inspection

How long do you have to report headstone damage after delivery?

Most monument companies require damage reports within 24-72 hours of delivery. Check your order paperwork for the exact deadline, and inspect immediately upon arrival to stay within this window.

Can you refuse delivery of a damaged headstone?

Yes. If the crate shows obvious severe damage, you can refuse delivery. Note the reason for refusal on the shipping paperwork before the driver leaves, and contact the seller immediately.

Who is responsible for headstone damage during shipping?

Shipping damage is typically the seller's or carrier's responsibility, not yours. Contact the company you purchased from to file a claim. They'll handle the carrier dispute and arrange replacement.

Does the cemetery inspect the headstone before installation?

Cemeteries verify that headstones meet their size and style regulations, but they generally don't inspect for shipping damage or engraving accuracy. That responsibility falls entirely on you.

Is it safe to use Dawn dish soap to clean a headstone?

Mild dish soap mixed with water is generally safe for granite and bronze. Avoid harsh chemicals, and always rinse thoroughly. For marble or limestone, use even gentler methods or consult a professional.

 

Plan Ahead With Confidence

As your choose a headstone, you can also explore casket options in advance with Overnight Caskets—giving your family clarity when it matters most.

  • Ease decisions for loved ones
  • Explore casket options at your own pace
  • Record your preferences with clarity
Explore Casket Options Learn how planning ahead works >