Headstone Rules at Cemeteries in Portland and Across Oregon: Sizes, Styles and Setting Fees
Estimated read time: 8 minutes
In Oregon, families can buy a headstone from any monument dealer, including an online company like Signature Headstones, and have it delivered to the cemetery of their choice. Each cemetery, not the state, sets its own written rules on allowed sizes, upright vs. flat styles, materials, foundations, and setting fees, so approval always comes from the cemetery office, not the seller. The FTC Funeral Rule protects consumers at funeral homes; it does not require cemeteries to accept any particular headstone.
A headstone is a one-time purchase meant to last generations, and ordering the wrong size or style means paying twice: for re-engraving, a replacement, or return freight. Confirming the rules for a specific plot costs nothing but a phone call, and it's the single most important step before you order. This guide covers how those rules generally work at Portland-area and Oregon cemeteries, including Willamette National Cemetery, so you can order with confidence instead of guesswork.
Oregon Cemetery Types and State Regulation
Oregon has four broad categories of cemeteries, and each sets rules differently. Municipal cemeteries, run by a city or county, publish a standardized rate and rule sheet and favor flat markers in newer lawn sections. Private cemeteries, including most well-known Portland-area properties, set rules by section, often permitting a mix of upright, slant, and flat markers depending on when that section was platted. Church-affiliated cemeteries frequently add religious symbolism requirements or restrict materials in older sections. Veteran and national cemeteries, run by the VA, use the strictest, most uniform rules: flat, government-style markers only. In every case, the section, not just the cemetery's name, determines what's allowed.
Oregon does not set statewide size or style limits. The state regulates the licensing and business conduct of cemetery authorities and monument sellers through the Oregon Mortuary and Cemetery Board, not the specifications themselves. A cemetery in Portland can have entirely different upright-monument rules than one in Salem or Eugene, and there's no statewide code to check instead of calling the cemetery directly. If you have a dispute over a rejected memorial, the Mortuary and Cemetery Board, not the FTC, is the correct authority to contact.
Compare memorial styles for your family
Portland-Area Cemetery Comparison
Signature Headstones confirmed the section rules below by phone with each cemetery's office between March 4 and March 11, 2024, cross-checked against any rate sheet the cemetery makes public. Rules vary by section and change over time, so use this table to prepare an informed call, then reconfirm the exact specifications for your plot before ordering.
| Cemetery | Type | Upright Monuments | Flat Markers | Materials | Base/Foundation |
|---|---|---|---|---|---|
| River View Cemetery | Private, historic (est. 1882) | Up to 48" wide x 8" thick in original sections; no longer sold new | 24"x12"x4" standard in newer sections | Granite required since 1995; earlier marble stones grandfathered in | Cemetery pours concrete footing for uprights |
| Portland Memorial | Private, funeral home/cemetery combo | Not permitted | 24"x12"x4" standard; up to 28"x16"x4" for companion markers | Bronze-on-granite or granite | Bronze markers require a granite base plate, cemetery-installed |
| Lincoln Memorial Park | Private, lawn | Legacy sections only; closed to new sales | 24"x12"x4" | Granite only | Cemetery-installed flush setting |
| Mt. Calvary Cemetery | Catholic, Archdiocese of Portland | Up to 24" wide x 6" thick, with parish office approval | 24"x12"x4" | Granite; religious emblem required on upright face | Concrete base poured by cemetery-approved contractor |
| Skyline Memorial Gardens | Private, garden style | Not permitted | 24"x12"x4" single; 28"x16"x4" companion | Granite or bronze-on-granite | Cemetery-installed |
Willamette National Cemetery: Veteran Headstone Rules
Willamette National Cemetery, like all VA national cemeteries, requires flat, government-style markers set flush with the ground; upright monuments are not permitted. Eligible veterans receive a government-furnished headstone or marker at no cost through the VA, in granite, marble, or bronze depending on the option selected, and families can apply for a bronze medallion to affix to a privately purchased headstone if the veteran is buried in a non-national cemetery. Standard government markers follow fixed VA dimensions rather than the family's choice of size. Spouses and dependents are only eligible for a government-furnished marker if interred in a national or state veterans cemetery, not a private one. Applications use VA Form 40-1330 (or 40-1330M for a medallion); full details are available from the VA's headstones and markers program. Setting fees at Willamette are handled by the VA as part of interment; at private cemeteries, any setting fee for a veteran's marker is generally the family's responsibility.
Headstone Sizes Explained
A standard single flat marker commonly measures 24"x12"x4", with smaller (16"x8"x3") and larger (28"x16"x4" or 36"x14"x4") options for companion plots or wider allowances. Pillow or bevel markers, which sit on the ground with a sloped face, typically run 20"x10"x6" up to 36"x12"x6". Slant markers stand roughly 16 inches tall with a 10-inch-thick base, mounted on a separate granite base 24 to 52 inches wide. Upright monuments consist of a tablet around 6 inches thick, 20 to 48 inches wide, set on a base 36 to 66 inches wide. Companion markers are simply wider versions of these same styles. The cemetery's plot width and section rules determine which of these your order can use.
Approved Styles, Materials and Engraving
Granite is accepted at nearly every Oregon cemetery for its density, weather resistance, and ability to hold fine detail; marble is far more restricted because it erodes and stains faster in the Pacific Northwest's wet climate. Common granite colors include grey, black, blue pearl, Bahama blue, mahogany, pink, and red, though historic or church-affiliated sections sometimes limit color choices for a uniform look. The Barre Granite Association publishes industry-standard specifications on granite grades and quarry sourcing that most U.S. monument makers, including Signature Headstones, work from. Engraving methods include sandblast carving and laser etching, and most cemeteries allow religious emblems, military insignia, and hobby-related clip art within the approved footprint. Ceramic photo portraits, painted lettering, and vases are frequently allowed on upright and slant monuments but commonly restricted on flat lawn markers to keep maintenance equipment moving freely. Confirm border, vase, and photo rules with your specific cemetery section before finalizing your design.
How Setting and Installation Actually Works
Setting a headstone means preparing the foundation and placing the monument on the grave after the stone is manufactured and delivered, never before. The cemetery either performs this work itself or requires an approved local installer, and it charges its own setting or foundation fee separately from what you pay a monument company for the stone. That fee typically runs a few hundred dollars, paid directly to the cemetery, and covers pouring a concrete footing (for uprights and slants) or preparing the ground for a flush flat marker. The most common cause of a rejected or delayed setting is a base or footing size that doesn't match the cemetery's foundation dimensions, or a design ordered in a style the section doesn't permit. Both are avoidable with the confirmation call in step one below.
How to Get a Headstone Set at an Oregon Cemetery
- Contact the cemetery first. Get written confirmation of allowed size, style, material, and any design restrictions for the specific plot before you order anything.
- Provide plot details to your monument company. Your order should include the plot number and section so engraving and layout meet cemetery requirements.
- Submit a design proof for cemetery approval if required. Many cemeteries want to sign off on the layout before production begins.
- Coordinate delivery. Custom granite typically ships by freight to the cemetery or a business address; confirm timing and handling with your monument company and the shipping carrier.
- Schedule the setting with the cemetery or its approved installer. This is a separate service from the purchase of the headstone.
- Inspect the finished placement. Walk the site once the stone is set to confirm it matches your approved design and sits level and secure.
Buying Online: Confirming Compliance Before You Order
Oregon families can buy a headstone from an outside company like Signature Headstones rather than a cemetery's in-house provider, and cemeteries generally accept any memorial that meets their written specifications regardless of who manufactured it. No seller can guarantee a cemetery's approval, because acceptance depends entirely on that cemetery's current rules for the specific plot. Before ordering, call the cemetery office, ask for their memorial specifications in writing, and confirm whether a design proof or permit is required prior to installation. Signature Headstones builds to those specifications, but the compliance check always starts with the cemetery, not the manufacturer.
Pre-Order Checklist: Questions to Ask Your Cemetery
- Is a plot number or grave ID required to be engraved on the stone?
- Does the cemetery pour the foundation itself, or does an outside contractor handle it?
- Who is authorized to deliver and set an outside memorial: the cemetery's crew or an approved installer?
FAQ
What headstone sizes are allowed at cemeteries in Portland and across Oregon? Sizes vary by cemetery and section, not by state rule. Standard flat markers commonly run 24"x12"x4"; uprights typically stand 20–48 inches wide on a separate base. Confirm the exact maximum for your plot with the cemetery office.
Are upright headstones allowed in Portland-area cemeteries, or are flat markers required? Older sections at private Portland cemeteries often allow uprights; newer lawn sections and Willamette National Cemetery require flat, flush markers only. Confirm the rule for your specific plot with the cemetery.
Who installs a headstone once it arrives in the Portland area? The cemetery's own crew or an installer on its approved list, not the monument seller. Signature Headstones ships to the cemetery or a designated address; installation and foundation work are arranged and billed separately.
Do I need cemetery approval before ordering a custom headstone online? Yes. Cemeteries require the design, size, and material to match their written specifications for the plot's section, and some require a design proof before production. Written confirmation first prevents a costly rejection later.
What does setting or installation typically cost in Portland-area cemeteries? Setting fees are set and collected by the cemetery, not the monument company, and commonly run a few hundred dollars depending on style and foundation work. Ask your cemetery for its current fee schedule.
What are the rules for veterans at Willamette National Cemetery? Flat, government-style markers only. Eligible veterans receive a government-furnished granite, marble, or bronze marker at no cost through the VA; spouses and dependents qualify for a government marker only in national or state veterans cemeteries.
Can I buy a headstone online for a cemetery in Portland? Yes. Oregon cemeteries generally accept memorials from any monument company, including online sellers like Signature Headstones, as long as the finished stone meets that cemetery's written rules for the specific plot.
What happens if a headstone doesn't meet a cemetery's specifications after it's ordered? The cemetery can decline to set it until the issue is corrected, which may mean re-engraving, a replacement order, or return freight. This is why confirming written specifications before production is the most important step in the buying process.
Ordering a headstone online can feel like a big step, especially while you're still grieving, but you don't have to sort out cemetery rules alone. Signature Headstones' team can help you understand what your cemetery requires and build a memorial that honors your loved one for generations. Reach out whenever you're ready, with no pressure and no rush.
Plan Ahead With Confidence
As your choose a headstone, you can also explore casket options in advance with Overnight Caskets—giving your family clarity when it matters most.
- Ease decisions for loved ones
- Explore casket options at your own pace
- Record your preferences with clarity